2200 PRO
2200 PRO
1 = UP
2 = STOP
3 = DOWN
4 = SET
5 = RESET
6 = AUTOMATIC OPERATION/
MANUAL OPERATION
SELECT
6
6
5
5
4
4
1
1
2
2
3
3
The 2200 display normally shows actual measured weather conditions.
Left* = Sun light in klx
Left* = Temperature in F
Right = Wind Speed in mph
(* Toggle between sun and temperature readings by pressing the up
button (1) for 3 seconds or longer when the unit is in automatic mode.)
1 A sun or hand symbol will be displayed to indicate if the unit is in
automatic or manual mode.
2 A solid arrow indicates the last direction ** the unit switched. A
blinking arrow indicates the unit is active powering the unit in the
indicated direction. Note, the motor will stop if it reaches its limit even if
the unit indicates it is switching power to the motor.
(** If the stop button is depressed before run time ends in the up
direction, the 2200 will still display a solid down arrow to indicate the unit
may still be part way out)
Pressing the set button for a second will cause the programmed
threshold values to be displayed. The 2200 will display the programmed
sun and wind thresholds for 5 seconds and then display the
programmed temperature threshold for 5 seconds. At the end of this
time the unit will return automatically to the measured weather
conditions.
Klx
mph
Klx
mph
1
2
2
3
