2200 PRO
2200 PRO
SET
M
M
6.1 Sun Function
- Enter the programming mode by pressing the set
button (4) for 3 seconds. The screen (Fig. 2) to the right will appear. Use
the up (1) or down (3) buttons to select the sun symbol (blinking)
Press the set button (4) and the sun threshold value will appear (Fig 3)
You can adjust this value up or down by pressing the up (1) or down (3)
buttons.
Press the set button (4) and the sun delay down time will appear (Fig. 4).
This is the length of time the measured sun light must be above the
threshold value set above before the 2200 will lower the window
covering. You can adjust this value by pressing the up (1) or down (3)
buttons.
Press the set button (4) and the sun delay up time will appear (Fig. 5).
This is the length of time the measured sun light must be below the
threshold value set above before the 2200 will raise the window
covering. You can adjust this value by pressing the up (1) or down (3)
buttons.
Press the set button (4) to save the programmed sun values and return
to the programming screen (Fig. 2). To adjust other values see following
sections or press the stop button (2) to return to normal operating
mode.
Fig. 2
Klx
SET
SET
min
SET
min
Fig. 3
Fig. 4
Fig. 5
6.2 Temperature Function
- Enter the programming mode by pressing
the set button (4) for 3 seconds. The screen (Fig. 6) to the right will
appear. Use the up (1) or down (3) buttons to select the temperature
symbol (blinking).
Press the set button (4) and the temperature function screen will appear
(Fig. 7) or (Fig. 8). FUNC 0 means the temperature function is inactive.
FUNC 1 means the temperature function is active. The function can be
changed by pressing the up (1) or down (3) buttons.
SET
SET
SET
M
M
Fig. 6
Fig. 7
Fig. 8
6
