INSTALLATION AND CONNECTION
4
Ø17 for passing the
declutching cable with
sheath
The box can be mounted horizontally or vertically
vertically
horizontally
Hole of Ø5 for fixing
the box
4.1 Wall drilling and fixing the box
Pass power cable
+ ground-wire
44
13
Please follow the following steps to ensure proper installation:
1 - Mark the position of the holes using the scale template (Appendix 1) and drill.
2 - Remove the two screws provided with the support of the switch. (cf
⑦
)
3 - Pass the declutching cable through the hole (see photo above). Ensure that the flexible sheath is well supported on the bottom of
the box.
4 - Pass the ground wire and power cables.
5 - Set the declutching box to the wall with the appropriate fasteners.
4.2 Electrical connection
1- Connect the ground wire to the screw provided for this purpose (see number
⑩
on the bottom of the box)
2 - Remove the switch from its support.
3 - Place the power cables through the bracket.
3/6
Summary of Contents for 5124491A
Page 14: ......
Page 15: ......
Page 16: ...SIMU S A S Les Giranaux BP71 70103 Arc Les Gray CEDEX FRANCE ...
