SIMULINE INC..
1
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLWING:
To maintain safety:
To ensure the safe operation of this product, be sure to read the following before usage.
The following instructions are intended for the users, operators and the personnel in charge of the operation
of the product. After carefully reading and sufficiently understanding the warning displays and cautions,
handle the product appropriately. Be sure to keep this manual close to the product or in a convenient place
for future reference.
Herein, explanations which require special attention are enclosed with dual lines. Depending on the
potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used.
Be sure to understand the contents of the displays before the text.
Indicates that mishandling the
product by disregarding this
pictograph will cause severe injury
or death.
Indicates that mishandling the
product by disregarding this
caution will cause a slight
hazardous situation which can
result in personal injury and/or
material damage.
Indicates that mishandling the
product by disregarding this
warning will cause a potentially
hazardous situation which can
result in death or serious injury.
For safe usage of this product, the following pictographs are used:
Indicates “HANDLE WITH CARE.” In order to protect the human body and equipment, this
display is attached to places where the User Manual should be referred to.
Indicates a “Protective Earth Terminal.” Before operating the equipment, be sure to connect it
to the Ground.
(The step may be omitted for products in which a power cord with earth is used.)
●
Perform work in accordance with the instructions herein stated.
Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to
perform work as per the instructions can cause accidents. In the case where only those who have
technical expertise should perform the work to avoid hazardous situation, the instructions herein state
that the serviceman should perform such work.
●
Be sure to turn off power before working on the machine.
To prevent electric shock, be sure to turn off power before starting the work in which the worker touches
the interior of the product. If the work is to be performed in the power-on status, the Instruction Manual
herein always states to that effect.
●
Be sure to ground the Earth Terminal.
(This is not required in the case where a power cord with earth
is used.)
This product equipped with the Earth Terminal. When installing the product, connect the Earth Terminal
to the “accurately grounded indoor earth terminal” by using an earth wire. Unless the product is
grounded appropriately, the user can be subject to electric shock. After performing repair, etc. for the
Control equipment, ensure that the Earth Wire is firmly connected to the Control equipment.
●
Ensure that Power Supply used is equipped with an Earth Leakage Breaker.
This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not
equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.
