E Q U O B O X R T U - M o d B u s
–
U s e r G u i d e R e v . 2 . 2
S I N A P S I S . r . l . |
V i a d e l l e Q u e r c e 1 1 / 1 3 - 0 6 0 8 3 B A S T I A U M B R A ( P G )
–
I t a l y
T . + 3 9
0 7 5 8 0 1 1 6 0 4
- F . + 3 9
0 7 5 8 0 1 4 6 0 2 |
w w w . s i n a p s i t e c h . i t
i n f o @ s i n a p s i t e c h . i t
15
8.3
Display
–
RTU INFO
Press OK in the RTU INFO menu to access the submenu that displays the network parameters as shown in the
figure:
Figure 10 - RTU INFO
Each page,
1-1
,
1-2
, and
1-3
shows the model of the device and the current date and time. As for the content
of the single sections, we have:
•
1-1
o
Serial Number
: Shows the serial number to be indicated in the event of technical support
o
Meter DB Ver.;
Shows the version of the meter database installed in the datalogger
•
1-2
o
LAN ETH status:
Indicates the connection status of Ethernet ports ETH1 and ETH2. In the event at
least one of the two ports is connected, it shows the IP address of the network interface
o
Internet status:
Indicates whether the RTU can connect to the Internet or not. If an Internet
connection is available, the public IP address, with which the RTU can be viewed remotely, is
displayed
•
1-3
o
Firmware version:
Indicates the current firmware
o
WEB version:
indicates the current version of the web interface
1
1-1
1-2
1-3
