background image

7. Technical data for the Sinarback eVolution75 H

•  Digital Camera Back for 1- and 4-Shot exposures with all types of light
•  Type of CCD Sensor: Dalsa FTF 5066 C, RGB Mosaic Filter, Full-Frame technology
•  Active sensor size: 48.0 x 36.0 mm
•  Resolution: 6668 x 4992 pixels (33 million)
•  CCD pixel size: 7.2 x 7.2 μm
•  Format proportion: 4:3
•  File size: RAW/DNG (16 bit): 1-shot 68 MB; 4-shot 190 MB (RGB)
•  File size at 48 bit TIFF: 190 MB
•  File size at 24 bit TIFF: 95 MB
•  Exposure sequences: Up to 24 exposures per minute
•  Live image viewfinder mode: Yes
•  Shutter speeds: 1/4000 to 32 seconds
•  Dynamic range (contrast): 12 f stops
•  Digitalization: 48 bit (16 bit per color channel)
•  Cooling: Peltier and ventilation
•  Nominal sensitivity: ISO 50 (adjustable from ISO 50 to ISO 400)
•  Interfaces: IEEE 1394B FireWire (800 Mbps)
•  Position sensor: Yes
•  Power supply: Choice of Firewire or external 12 Volt source
•  Exposure software: Sinar CaptureShop™ Version 5.6.0 or higher
•  Dimensions: 90 x 85 x 73 mm (3 9/16 x 3 3/8 x 2 7/8 inches)
•   Weight: 500 grams (less than 18 ounces)

•  Camera adaptations:
 

Sinar p3/p2/p/x view cameras, Sinar Hy6, Sinar m, Sinarcam 2 

 

Contax 645 AF, Fuji GX 680 I, II, III / Hasselblad V, H1, H2 / Mamiya RZ 67/Pro II, RB 67, 645 AFD,  

 

AFD II, 645 Super, Pro, Pro TL / Rolleiflex 6001, 6003, 6008, 6008 Integral, 6008 Integral 2, 

 

6008 AF / Non-Sinar 4x5” view cameras via Graflock Adapter

•  Computer requirements:
 

Apple Macintosh G5 or Core Duo with ≥1.8 GHz, OS 10.6.4 or higher, 2GB RAM, 

 

IEEE 1394b interface

Sinar Photography AG - Farbhofstrasse 21 - 8048 Zürich/Switzerland    

Phone +41 (0)44 217 80 30 - Fax +41 (0)44 217 80 50 - contact@sinar.ch - www.sinar.ch

13.10.10  - Seite 13

Summary of Contents for eVolution75 H















Reviews: