F
IRST
U
SE
18
Sinarback eSprit65 LV Operating Manual, Version 1.2
The Sinarback eSprit 65 LV is operated using the operational elements at the front. The
main functions of the operational elements are summarized in the following table. A more
detailed description of the menu functions can be found in chapter 7 Operating the
menu .
[Power]
Switches on and off the Sinarback eSprit 65 LV.
[Settings]
Opens and closes the menu “Settings” of the Sinarback eSprit65 LV.
[Info / Esc]
The menus “Settings” and “Acquisition” can be left without applying any
changes or selected functions.
In a loaded image, the following image information is displayed when
pressing the button repeatedly:
- Capture settings: aperture, shutter speed, ISO number,
capture date and time
- Image with histogram
- Image with grid
- Image without overlay
Trackball Navigation
Navigation in the menu (when the menu is opened).
Image
selection
Opening the contact sheet, selecting and zooming images
from the contact sheet.
Selection
Select items from an open menu.
Acquisition
Open the menu “Acquisition”.
[Info / Esc] &
[Settings]
By simultaneously pressing the two buttons, selected images can be
deleted.
6.3
Getting started
Make sure that your Sinarback is safely attached to the camera. Set up the power supply
between the Sinarback and the camera ( chapter 4.3 Power supply).
Switch on your camera, then switch on the Sinarback by pressing [Power]. For the
operation in tethered mode, connect the Sinarback to the computer, and start the
software Sinar eXposure
TM
, then switch on the camera. For further information, refer to
the software manual of Sinar eXposure
TM
.
