- 14 -
materials are to be processed at higher speeds, process the materials in a limited number
of operations. At one go, 1200 ml material can be processed.
Placing the Citrus Juicer
1. Align the motor mill on the motor body.
2. Align the Bowl with the Motor mill and place it on the motor body by turning it clockwise.
3. Place the citrus juicer plate to the bowl and turn 30 degrees clockwise.
Notes (Citrus Juicer):
- The citrus juicer shall be used at low speeds.
Placing the Blender
1. Ensure that the lower part of the blade is tightly locked in its place.
2. Fill the decanter with materials.
3. Place the measurement bowl and cap correctly.
4. Place the blender decanter perpendicular to the motor base and lock it in place by
turning it clockwise.
Hints and Warnings
Before fully starting processing, use INSTANTANOUS OPERATION feature to pre-mix.
Process at most 1800 ml materials in one go.
Before operating the appliance, ensure that the lower part of the blade is locked in its
place.
During processing, use the measurement bowl to add materials
DISASSEMBLY
1. Remove the pushing gavel. Turn the cap counter clockwise, lift it up and remove it.
2. Remove the blade holder from the motor mill.
3. Pull the blades up to remove from blade holder.
4. Turn the cassette counter clockwise and remove it from the motor body. Remove it
by lifting it up.
CLEANING
Unplug the appliance before cleaning it!
Clean the outer side of the appliance using a wet cloth and without using any cleaning
agent if required.
DO NOT WASH ANY PART OF THE APPLIANCE IN DISHWASHER.
DO NOT SUBMERGE MOTOR BODY INTO WATER.
Summary of Contents for SHB 3111
