Sinbo SHC 4357, Instruction Manual

- 7 -

clipper.
• You may use a comb: lift the hair locks and cut them with the hair clipper over the
comb.
• Always start cutting from the head back.
• Comb the hair to reveal uneven locks.
• Use scissors to trim hair.

Step 5 – the final part
In the final stage of hair cutting, remove the universal attachment  from the unit, set the
switch  to the upper position, turn the blades of the clipper towards the hair and trim
hair on the temples and neck carefully. Do not press the clipper strongly, there is danger
of injuries or cuts when open blades come in contact with the skin.

Cone-shaped haircut
Install the universal attachment and select the required cutting length. Start cutting from
the head back towards the crown. Cut the hair against the direction of the growth, from
the front side towards the crown, and from the sides. To get a flat top haircut, use the
comb: lift the hair locks and cut them along the comb. Comb the hair to reveal uneven
locks.

CLEANING AND CARE
– Switch the hair clipper off after the use.
– Clean the hair clipper body with a soft, slightly damp cloth, and then wipe it dry.
– Never immerse the hair clipper, the blade block or the power adapter into water or
other liquids.
– Detach the universal attachment from the unit body. Use the brush to clean both
surfaces (inside and outside) of the attachment from the cut-off hair.
– You can wash the attachment under a water jet, then wipe it dry.
– Remove the blade block by pressing on the upper part of the block on the side with the
blades. Clean the blade block and the inner cavity under the blade block with the brush.
Install the blade block back to its place by inserting the bottom part of the block into the
groove on the unit body and pressing the upper part of the block . A click of the locks
shows that the blade block is set properly.
– Do not use solvents or abrasives for cleaning the unit set.
– Lubricate the blades with oil after every use.

STORAGE
– Clean the unit and lubricate the blades with lubricating oil before taking it away for
storage.
– Keep the unit in a dry cool place out of reach of children and disabled persons.