Page 4
List for maintenance and cleaning (general)
Interva
l
location
Content, method and instruction for maintenance and
cleaning
Clean
in
time
Outside
component
s
Use soft cloth with water to rub away water stain, dust,
blot,
rusting, trace of adhesive tape, etc. Neutral detergent
may be
used, if necessary. The yellow stain left by the detergent
shall
be rubbed away with water.
Note that the place
around
the food containing salt shall be rubbed at times all
the
more.
Shelf for
goods
Remove the food scrap and other foreign matter in time.
Use
soft cloth with water to rub away water stain and blot.
Not
that every corneal be cleaned to keep off bacteria
Once/
month
Inner
surface
and
attachment
of display
case
Remove the remnant use, food scrap and other foreign
matter
in the case, use soft cloth with water to rub away water
stain,
dust, blot, rusting, use neutral detergent and cleaning
solution
that does not damage the surface of the display case or
pollute
the food to wash the inner surface and attachment, then
use
water to clean.
Lighting
device
Use self-cloth with water to rub away water stain, dust,
blot,
use neutral detergent if necessary, then use dry towel to
clean, dry clean maybe used when dirt is not much.
Note that the power shall be cut off before cleaning.
Water
spout
Clean and remove the dirt deposited at the filtering web
of the
water spout, and use clean water to wash the filtering
web.
Note that the dirt can only be taken out. Flushing
the
dirt into the drainage is not allowed, or it may block
the sewage