Page 6
Daily maintenance and cleaning Guidance for
cleaning and maintenance
•
Clean internal surface and evaporator
• Cut off the power source, stop running.
• Take out foods stored in cabinets,and put them in other proper
cases.
• Disassemble bottom bracket, bottom shelf, etc. and clean them.
• Clean bone body: move scraps out the case, then clean. Do not use
water to rinse because of its evaporating system, or dirt will enter
evaporating water box and lead to copper tubes corruption.
• Reassemble all parts in correct order.
• Switch on the cabinet after all parts are drying.
• Start refrigeration function.
• Put foods in the cabinets when its temperature is reasonable.
•
Clean water spout
• Discharge the dirt and scraps into prepared water box.
Note: Dirt only allowed to take out, do not let them enter drainage or it
will block drainage.
• Pour proper water to the cabinet, if not flows smoothly, it means the
main water pipe blocked, tell the local maintenance company.
Note: Do not use high-pressure water to rinse the cabinet to
avoid danger.
Installation
• Disassemble wooden package, move the cabinet to the appointed position.
• Check packing list to conform goods.
• For plug-in case, fix L/R Kick plates under L/R side panels.
Maintenance
Preventive maintenance
• Prepare a regular cleaning plan according to the summary of this
instruction, to let employees learn the importance of cleaning and
maintenance and follow the recommended rules. Before cleaning and
checking electrical appliances, switch off the display case, because water
on the parts may cause electrical shock and personal casualty.
• When cleaning display case, clean fan blades and coils, Ensure there has
no dirt and dust on the fan blades and coils exposed, as deposited dirt