If only the welding ma-
chine is present, this must
be handled using the
convenient handle on the
upper part of the welding
machine itself.
ATTENTION: risk of overturning when unloading
the machine from the pallet equipped with de-
scent ramps.
ATTENTION: when carrying out unpacking op-
erations, it may be necessary to have two per-
sons equipped with suitable personal protective
equipment.
IMPORTANT: in addition to handling the machine us-
ing the special trolley, it can be lifted from the ground
after having wrapped it with lifting straps, by sling-
ing it from the bottom in a stable and safe way.
If provided, the machine must be lifted only and
exclusively by using M10 eye-bolts which are not
supplied.
Remove the protective caps from the threaded
holes and tighten up the lifting eye-bolts.
ATTENTION: The machine must remain packed
during unloading from the means of transport
and until it is transferred to its destination.
IMPORTANT: The Manufacturer cannot be held
liable for damage caused to persons or property
due to utilising lifting systems other than those
described above.
4.5. UNPACKING
IMPORTANT: Consult the "Handling and lifting"
paragraph to correctly handle the machine.
ATTENTION: To remove the machine from the
packaging, use appropriate means and methods
to avoid risks to human health. The packaging
material must be properly disposed of in compli-
ance with the laws in force.
•
Remove the protective covers such as straps, box-
es, etc. using appropriate tools so as not to ruin
the content.
•
Remove the protective covers such as straps, box-
es, etc. using appropriate tools so as not to ruin
the content.
•
Position appropriate descent ramps from the pallet
verifying that the slides are well hooked to the pallet.
• Complete the unloading operations by carefully
lowering the machine from the pallet.
16
1.995.229 EN - Rev. 1.1
NOVATIG 403 DC PULSE
