8. ACCESSORIES AND SPARE
PARTS
8.1. CUSTOMER SERVICE
The Manufacturer is always at your disposal for any
type of information regarding the use, maintenance,
and installation of the equipment.
It is suggested that the Customer asks clear ques-
tions, making reference to this Manual and the in-
structions listed.
8.2. SPARE PARTS
IMPORTANT: ALWAYS USE ORIGINAL SPARE
PARTS. The Manufacturer cannot be held liable
for breakages, malfunctions or damage to per-
sons or property arising from the use of non-orig-
inal parts.
In the event that non-original spare parts are used,
the conditions of the Warranty (if still in place) and of
the Manufacturer's liability in the use of the machine
and any damage deriving to persons and/or property
are void.
9. ADDITIONAL INSTRUCTIONS
9.1. WASTE DISPOSAL
It is the responsibility of the user, in accordance with
the laws in force in their country, to ensure correct
disposal of the waste produced by the machine dur-
ing production.
The disposal of hydraulic oil lubricants and the re-
placed parts must be carried out in compliance with
the regulations in force in the country where the ma-
chine is in use.
9.2. DECOMMISSIONING
AND DISMANTLING
With reference to the WEEE Directive 2012/19 / EU
(Waste Electrical and Electronic Equipment), the user,
during disposal, must dispose of the equipment in
the appropriate authorised collection centres, or re-
turn it still installed to the seller at the time of a new
purchase.
IMPORTANT: do not dispose of polluting materi-
als in the environment. Dispose of such products
in compliance with legislation in force.
IMPORTANT: the illegal disposal of Waste Elec-
trical and Electronic Equipment is punished with
sanctions regulated by the laws in force in the ter-
ritory in which the infringement is ascertained.
Waste Electrical and Electronic Equipment may
contain hazardous substances with potentially
harmful effects on the environment and on peo-
ple's health. It is recommended to dispose of it
properly.
WEEE refers to Waste Electrical and Electronic Equip-
ment (EEE) including all components, sub-assem-
blies and consumables that are an integral part of the
product at the time the decision is made to discard it.
The law divides these into 2 main categories called
PROFESSIONAL WEEE or DOMESTIC WEEE.
PROFESSIONAL WEEE means all waste electrical and
electronic equipment intended for purely industrial
use.
DOMESTIC WEEE means all waste electrical and
electronic equipment intended for mixed use both in
an industrial environment and in a domestic environ-
ment.
DOMESTIC WEEE is identified as all single-phase
power supply generators with output current MAX
<= 200A with their accessories.
33
1.995.229 EN - Rev. 1.1
NOVATIG 403 DC PULSE
