3.1.6 Empty Resin Cartridge
If all resin in the resin cartridge runs out, resin won’t be supplied. Replace with a new one.
For details of how to replace a resin cartridge, refer to [Replacing Resin Tank] of [5.Maintenance].
-
Smart IC chip is used to keep track of the remaining amount of resin in the cartridge. If resin is
manually charged or removed from the resin tank, malfunction may occur because it cannot detect
the correct remaining amount.
-
Do not charge remaining resin into another cartridge. Malfunction may occur because resin
amount that smart IC chip knows may be different from the actual one.
-
If resin cartridge has been used in manual supply mode, keep using it in manual mode.
-
If resin is once used for printing in the resin tank, store in the different bottle.
3.2
In case of Opening Orange Cover during Printing
To prevent users from accidentally using the device with the cover open, double safety devices are
used; when the cover is opened during printing, the device is designed to temporarily stop printing for
user’s safety. Once the cover is closed, printing will resume.
However, because it may result in the degradation of print quality or printing failure, do not open the
orange cover during printing by mistake.
3.3
In case of Printing Failure
Inevitably, printing can fail. In the event of printing failure, a small piece of missing or incompletely
hardened resin will float in the resin tank, or remain attached to the film. These contaminants are
generated more in case of printing failure rather than successful printing.
In case of printing failure, clean the resin tank according to the following instructions.
Wear clean nitril gloves before starting cleaning.
3.3.1 Removing Failed Print
Refer to how to remove failed print, please refer to [Resin Tank] and [Platform] sections of
[5.Maintenance].
-
Use fingers or rubber scrapper to remove residues of prints sticking to film and cured resin or
particles floating in resin.
-
Do not scrape the bottom of resin tank too strongly. Film can loosen or tear out.
5
Maintenance
Summary of Contents for A1 Series
