When removing and moving platform, be careful not to drop or splash resin.
-
Use a metal scrapper with care because blade is sharp. You may be injured when removing output.
-
Close the orange cover after removing platform from the device. Resin can be cured if resin is
exposed to light sources for long time. Cured resin may degrade the print quality, and cause print
failure.
1.2
Finishing Printed Output
Removing supports
Remove supports using nipper enclosed in the finishing kit.
Use a nipper with care because blade is sharp. Be careful not to cut your fingers or hand.
Cleaning printed output with Isopropyl alcohol (IPA)
Do not place IPA close to heat, fire or sparks because IPA can be flammable, even explosive.
Pour Isopropyl alcohol(IPA) in the washing tub enclosed in the finishing kit, and put the printed output
in IPA. Clean the surface of printed output using brush or toothbrush.
Use sprayer to wipe out fine gaps or holes of output with IPA.
2
1
4
Printed Output Check
Summary of Contents for A1 Series
