Drying and post curing
-
Curing time may vary depending on the printed output’s size and shape.
-
For quick curing, fill a transparent container with water and put a printed output in the water.
Clean up Isopropyl alcohol completely using paper towel or dry it well using air compressor. Then
expose the printed output to sunlight for 60 minutes, or use curing machine (optional) for curing.
1.3
Preparing the Next Print
Cleaning platform
Remove debris of print and contaminants remaining on platform using metal scrapper.
Clean every each holes of platform using platform cleaning brush.
Clean remaining resin using paper towel and Isopropyl alcohol.
Finally, clean all remaining Isopropyl alcohol using dry paper towel.
Please remove platform first, and install it very last. Resin dropped or splashed from platform may flow
in the inside of the device.
1
3
Metal Scrapper
Platform
Cleaning Brush
4
Printed Output Check
Summary of Contents for A1 Series
