HOW TO USE
How to Open
-
Place the ironing board in a vertical position (fig. 1) and the iron support upwards; drive the
height adjusting lever and pull the feet outwards until the desired height is reached.
-
It is also possible to change the height of the ironing board according to the different positions.
All you need to do is pull the handle and adjust the ironing board to position.
-
The ironing board must be firmly supported on the ground.
-
Place the iron on the iron support and plug the iron’s feed cable in to power point base.
-
Connect the plug of the iron into the mains. Make sure that the tension of the mains is the
same as that indicated on the feature plate on the device.
-
Start the device by pressing on the power switch.
-
Simply by select the air intake switch for airflow upward, downward or turn it off.
NOTE : After you have finished ironing, leave the ironing board plugged in for 3 or 4 Minutes, so
as to ensure that there is no humidity trapped inside the board. This will contribute to extend the
board’s life span.
Downloaded from
