background image

                                                                                                        Page 3 of 12

 

 

 

 

CAUTION 

Do not allow children touch the appliance when ironing. 

Do not leave the appliance unattended when it is connected to a mains supply outlet. 

Do not use an extension power cord set unless competent authority has approved it. 

Do not add perfumed, vinegar or other chemical liquids into the water tank; they can 

damage the appliance seriously. 

Do not immerse the appliance in water or any other liquid. 

Do not use the appliance when it is damaged or performs abnormally.  

The appliance is not to be used if it has been dropped, if there are visible signs of 

damage or if it is leaking. 

Do not touch the iron rest during or just after ironing. It is hot!  

Do not roll the power cord or supply cord around the iron unit or base console for 

storage until it has cooled down completely. 

Do not attempt to open the cabinet or dismantle any parts from the appliance, there is 

no serviceable part inside. 

The filling aperture must not be opened during use. Instructions for the safe refilling 

of the water reservoir shall be given. 

When cleaning, never unscrew the boiler cap whilst the unit is pressurized. Steam will 

shoot out and burn you. Always switch off, unplug and leave overnight before 

commencing to clean the boiler. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for SISS2280













Reviews: