04/01/2016
7
HOW TO BREW
1. Place Brewer upright on a flat surface, remove all product packaging
and plug into outlet.
2. Remove reservoir and reservoir lid, then fill with
water to the MAX FILL line.
3. Replace reservoir lid and place reservoir on top Brewer.
Note: make sure that the reservoir is well put on the brewer
4. ** the appliance has water level senser, if water level is lower than
Min line, the brewer will not be allowed to make a new brew
until refill water above the Min line, with indication of flashing light in
the water level indicator.
5. Lift the handle of the brewer and insert a chosen K-Cup® pack into
the k-cup pack housing, do not peel off the foil cover of the k-cup pack.
CAUTION: Avoid the sharp piercing pin
inside the brew head (even it will be hidden
when the handle is opened)
Summary of Contents for AC-505K
Page 6: ......