background image

04/01/2016

9

How to change default coffee volume ( 6oz- 8 oz-12 oz):

a. 

leave the machine unplugged. 

b. press the small cup button and keep it pressed, in the mean time, insert the 

plug into socket. 
c. the middle cup button is lit steadily, which stands for the factory default 
setting.
d. You can press the small cup size to set the default volume at: 4oz- 6oz- 10 oz 
for the 3 botton.
e. or Press the big cup button to set the default volume at: 8oz- 10oz- 12oz. 
f. After your choose, press the on/off button to memory the change, all 

buttons go off.

g.Turn on the brewer by pressing on/off button and the new coffee volume is 

programmed.

How to set the Stand-by time

The brewer will shut off automatically once the auto shut off time is reached. 
The default setting from the factory is 1 hour. To change the auto shut off time 
follow the instructions below
1. Ensure that the brewer is unplugged before programming
2. Press the MEDIUM CUP button and hold it down while simultaneously 
plugging the brewer into the outlet. Hold the button in until you hear two short 
beeps. The ON/OFF button will begin to blink and the MEDIUM CUP button will 
illuminate steadily which represents the default setting of 1 hour before your 
brewer automatically turns off.
3. Press the SMALL cup button to change the setting to fifteen minutes
4. Press the LARGE cup button to change the setting to two hours.
5. After you have selected the preferred auto-off time press the ON/OFF button 
to record the setting to the brewer memory. 
6. Press the ON/OFF button again to turn your brewer back on using your new 
settings.
7. The new settings will stay in memory regardless if the machine is unplugged, 
you only need to set it one time. 

How to reset the machine.

a. leave the machine unplugged. 

b. press the big cup button and keep it pressed, in the mean time, insert the 

plug into socket. 
c. The blue light of the water level gauge will flash twice with beeps, standing 
for the reset is completed. 
d. After the reset, the volume setting is 

6oz- 8oz-12 oz

for the 3 buttons.

the auto shut off time is  60 minutes. 

Tips: 

When use the machine in first time or the machine is cold, It is suggested to make a 

cup of water to  rinse the cup and in the mean time to help warm up the machine. 

*: optional feature. 
**: Optional feature. 

Summary of Contents for AC-505K















Reviews: