14
The following is a brief description of the menu functions.
HDSDI in:
Pattern (Encoder)
Each button press toggles between the internal patterns (Pattern
– default
value) and the serial digital (HD-SDI) input (Encoder).
Exit
Returns to the top level menus.
Stand’d (Standard):
In Encoder mode the HD-SDI input standard must match the output
standard selection. (i.e. if the HD-SDI input is 1080p/30Hz, selecting
standards other than this can result in corrupted outputs).
720p/25
Forces 720p/25Hz output standard for the HD-SDI, YPbPr and aCVi
outputs. (Note, a number of items of video equipment do accept this output
standard.)
720p/30
Forces 720p/30Hz output standard for the HD-SDI, YPbPr and aCVi
outputs. (Note, a number of items of video equipment do accept this output
standard.)
720p/50
Forces 720p/50Hz output standard for the HD-SDI, YPbPr and aCVi
outputs.
720p/59
Forces 720p/59.94Hz output standard for the HD-SDI, YPbPr and aCVi
outputs. (Pixel clock frequency is 74.
74.17582418MHz.)
720p/60
Forces 720p/60Hz output standard for the HD-SDI, YPbPr and aCVi
outputs. (Default output standard).
1080p/24
Forces 1080p/24Hz output standard for the HD-SDI, YPbPr and aCVi
outputs.
Summary of Contents for SM02
