15
1080p/25
Forces 1080p/25Hz output standard for the HD-SDI, YPbPr and aCVi
outputs.
1080p/29
Forces 1080p/29.97Hz output standard for the HD-SDI, YPbPr and aCVi
outputs. (Pixel clock frequency is 74.
74.17582418MHz.)
1080p/30
Forces 1080p/24Hz output standard for the HD-SDI, YPbPr and aCVi
outputs.
1080i/50
Forces 1080i/50Hz output standard for the HD-SDI, YPbPr and aCVi
outputs. (2:1 interlaced output
– frame rate = 25Hz.)
1080i/59
Forces 1080i/59.94Hz output standard for the HD-SDI, YPbPr and aCVi
outputs. (Pixel clock frequency is 74.
74.17582418MHz. 2:1 interlaced
output
– frame rate = 29.97Hz.)
1080i/60
Forces 1080i/60Hz output standard for the HD-SDI, YPbPr and aCVi
outputs. (2:1 interlaced output
– frame rate = 30Hz.)
Exit
Returns to the top level menus.
The specifications for the standards are shown in Appendix A.
Pattern:
Selects the output pattern when in ‘Pattern’ mode. (In ‘Encoder’ mode the
pattern menu operates but the pattern will not appear on the output.
Table 5 lists the patterns available for each standard. A full description of
the patterns can be found in Chapter 4.
Summary of Contents for SM02
