19
aCVi Rx
Displays the received ID and data words from the aCVi receiver (if present).
aCVi PE
Manual control of the pre-emphasis filter for the aCVi interface. The value is
between 0 (minimum) and 255 (maximum).
The degree of pre-emphasis set is dependent on the cable length and is
designed to approximately compensate for the high frequency loss of
>300m of RG-59 or UTP cable. Figures 6 and 7 show the aCVi output with
a 30MHz frequency sweep with minimum and maximum pre-emphasis set.
Figure 6 aCVi output, 30MHz sweep (Pre-emphasis = minimum).
Summary of Contents for SM02
