background image

4

Introduction

BeatBuddy Manual

Content Organization 

The BeatBuddy’s beats are organized into ‘songs’, each comprising ‘song parts’ (such 
as verse or chorus). Each song part has a main beat loop, an accent hit and multiple 
fills associated with it. When transitioning between song parts, the song parts are 
played in order until the last song part is played, and then it goes back to the first song 
part. For example, if there are 3 song parts, it will play part 1, 2, 3 and then back to 1. If 
you wish to play song parts out of order, you will need to use a MIDI controller such as 
the ​

MIDI Maestro

All beats and drum sets are stored on the SD card.  If you lose your SD card, you can 

download the content that came with your BeatBuddy​

 for free and place it on a new 

SD card.  

What the BeatBuddy is Not

:

 

The BeatBuddy is not a traditional drum machine: 

Drum machines have traditionally been used to create beats. The BeatBuddy is a 
performance tool, and cannot be used to c

r

eate beats. New beats can be created on 

the many beat creation software programs available (such as Guitar Pro, Cubase, 
ProTools, GarageBand, Ableton, EZ Drummer, etc.) and loaded onto the BeatBuddy 
with the BeatBuddy Manager Software (available as a FREE download at 

https://

singularsound.com/contact/​

). 

The BeatBuddy is not a traditional effect pedal: 

Unlike other effects pedals, the BeatBuddy is not intended to modify your 
instrument’s sound. It has input jacks only in case you want to put both the BeatBuddy 
and your instrument into the same sound system without the need for a mixer. The 
beats are not changed by your instrument’s sound. And your

 

instrument’s sound is 

not changed by the BeatBuddy. No instrument needs to be plugged into the 
BeatBuddy for it to work normally, so the BeatBuddy can be a stand-alone tool used 
by any musician. 

Summary of Contents for BeatBuddy

























































Reviews: