sinmag HS-3, Owner'S Manual

INTRODUCTION    

2

Brief Introduction 

HS-3 is Horizontal Slicer mainly used for hamburger and cake’s cutting. 

The products are transported to the blades by the conveyer belt. 

 
According to the required layers of the cake slicing, we can add the blade 

on the machine. The distance between the blades is a multiple of 5, 

minimum 5mm, maximum 135mm. As the conveyer belt is 380mm wide, 

the cake width must be less than 380mm. And the cake height should be 

less than 150mm. 

Owners and operators should carefully read and familiarize themselves 

with this entire manual before attempting to operate or service this machine. 

Complying with this manual will ensure years of safe and trouble-free 

operation. 

All of the information, illustration and specification contained in this manual 

are based on the latest product information available at the time of printing. 

SINMAG reserves the right to make changes at any time without notice. If 

questions arise during the operation or servicing, please contact us before 

proceeding. 

Specification