OPERATION
4
Operation Steps
1. Adjust the width of the guide plate outside of the conveyer belt (normally
3 hamburgs’ width is ok), then change the height of the blades according
to the desired thickness.
2. Switch on the power supply.
3. Place the breads or cakes on the conveyer belt and the belt will transport
them to be sliced.
How to change the blades
1.Loosen the knob as seen in the picture 1.
2.Open the box.
3.Take out the old blades.
4.Put in the new blades and tighten the knob.
Summary of Contents for HS-3
Page 1: ...OWNER S MANUAL HS 3 Horizontal Slicer ...
Page 7: ...PART LIST 6 ...
