sinmag SM-120a, Operation Manual

9

When the 

  key is pressed, timers will return to the set time.   

 
5.1.2

INDICATION LAMPS   

To show the following operation condition of the spiral mixer. 

a)

AUTO/MANUAL condition: When AUTO lamp lights up, it is in 
AUTO operation. 

    When MANUAL lamp lights up, it is in MANUAL operation. 

b)

Bowl direction condition: When 

  lamp lights up, the bowl is 

in FORWORD direction, when 

  lamp lights up, the bowl is in 

REVERSE direction. 

c)

Speed Condition: When “

Ⅰ

” lamp lights up, the bowl is in slow 

speed condition. When “

Ⅱ

”lamp lights up, it is in fast speed 

condition. 

d)

INCH lamp shows inching condition. 

When neither INCH nor ON lamp light up, it is in STOP condition. 

e)

ON lamp lights up showing ON condition. 

f)

STOP lamp lights up only when the safety cover is raised. 

g)

O••L.(Over-LOAD):This lamp lights up when the overload relay 
is on. Please remove the fault(voltage drop, mixer overloaded or 
cable connection becomes loose ) so that this lamp will turn off. 

5.1.3

FUNCTION KEYS 

 AUTO/MANUAL selection key 

Speed selection key 

  Bowl direction (Forward -0- Reverse) selection key. 

When it is set in “F”, the bowl should run in the same direction as the 

arrow mark “

→

”on the bowl. 

: Start key 

  : Stop key 

  : Inching key. 

Only the bowl will run while you press this key. 
 
5.2 AUTO OPERTAION 

A)

Press 

 key below “

Ⅰ

” timer to set the desired time for slow