SINMAG SM-402 Mixer
W & P Reedy Pty Ltd
02-9533-9522
www.wpreedy.com.au
Page 4
Picture 1. Em ergency
stop button. A red
m ushroom safety
switch. Push in to stop
the m achine. Twist
and pull out to reset.
WARNING
Serious injury possible
WARNING
Danger of electric shock
STOP
Be sure not to do
Picture 3.The handle
and bowl of the
m achine m ust be
raised to engage the
electrics of the m ixer.
Safety Precautions:
Before using the Sinmag SM-402 Planetary mixer, read the safety precautions
carefully so that you can use the machine properly. These symbols will appear in the
manual where precautions are necessary in order to avoid injury.
Before you start the Mixer:
Before starting, undertake a General Safety check:
•
Ensure the mixer is dry and place in a dry area.
•
Ensure if machine is mounted on a raised platform that the
platform is of sufficient strength and the mixer is securely
fastened to the platform.
•
Ensure that the power supply matches rating on the
machine.
•
Work area should be clean and free from obstructions, e.g.
nothing placed on or around the machine, such as scrapers,
knives etc.
•
Worker not wearing loose fitting clothing and so on.
The machine has the following key safety features:
1. Emergency stop button in the form of a red mushroom safety
switch on the side of the machine. See picture 1.
2. The mixer is fitted with a lift up safety guard ( picture 2. )which
permits safe operation of the machine. Under no circumstances should this safety
system be modified or removed. While the safety guard has been designed to be as
safe as possible for the operator to use,
extreme care
should be
taken not to place fingers anywhere near the planetary or mixing
attachment on the machine while it is in use.
3. The machine also has a safety switch fitted to the handle of the
mixer. The handle and bowl has to be raised to engage the electrics
of the machine. Picture 3.
Picture 2. Safety
Guard lifts up over the
top of the mixer. Once
the guard is in the
upright position the
mixer will stop.