The thermostat is equipped with a ground fault protection that can
detect a current leakage of 5 mA. When a current leakage is detected,
the ground fault protection is triggered and quickly interrupts the power
supply to prevent any serious injuries.
Resetting the ground fault protection
The RESET button warning light turns ON (red) when the ground
fault protection is triggered. If the RESET button warning light turns
ON during normal operation of the thermostat, simply press the
RESET button to reset the ground fault protection. The light will turn
OFF. If for any reason this situation occurs again, cut the power to
the heating system from the main electrical panel and ask a
qualified electrician to verify the installation.
Testing the ground fault protection
This thermostat has an Auto Test which periodically verifies the
correct operation of the protection circuit. You can also do this
manually:
1) Press the TEST button. If the RESET button's, red warning light does
not turn ON, the test has failed. Cut the power to the heating system
from the main electrical panel and ask a qualified electrician to verify
the installation.
2) Press the RESET button to restart the thermostat's base.
TROUBLESHOOTING GUIDE
What should I do if the E1F code appears on
my thermostat display?
The E1F code means that the thermostat is in
“Floor” mode and there is no connected
sensor. If your thermostat is not intended to
control an heated floor, change the
thermostat’s control mode for the “A mode”.
Use of the Works with Apple badge means that an accessory has been designed to work
specifically with the technology identified in the badge and has been certified by the
developer to meet Apple performance standards. Apple is not responsible for the operation
of this device or its compliance with safety and regulatory standards.
HomeKit is a trademark of Apple Inc.
Neviweb® is a registered trademark of Sinopé Technologies Inc. in Canada and the United
States.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other
countries.
App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google
Play and the Google Play logo are trademarks of Google Inc.
The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®
For more information, visit our Website:
Trasmitter module IC: 21098-ESPWROOM32 / FCC ID: 2AC7Z-ESPWROOM32
This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device does not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
3-year limited warranty
SINOPE TECHNOLOGIE INC. warrants the components of their products against
defects in material and workmanship for a 3-year period from the date of purchase,
under normal use and service, when proof of purchase of such is provided to the
manufacturer. This warranty does not cover any transportation costs that may be
incurred by the consumer. Nor does it cover a product subjected to misuse or
accidental damage. The obligation of SINOPÉ TECHNOLOGIE INC., under the terms
of this warranty, will be to supply a new unit and this releases the manufacturer from
paying the installation costs or other secondary charges linked to replacing the unit
or the components.
660-0735-0024-B
PROTECTION CONTRE LES FUITES À LA TERRE
TECHNICAL SPECIFICATIONS
Controlling this HomeKit-enabled accessory automatically and
away from home requires a HomePod, Apple TV, or iPad set
up as a home hub. It is recommended that you update to the
latest software and operating system.
GROUND FAULT PROTECTION
10 sec.
CONNECT AN EXPANSION UNIT (TR1310)
CONNECT THE AUXILIARY OUTPUT
It is possible to connect up to 10 expansion units to the
same device. (EXP function)
Second heating stage (15 sec / 15 min functions)
TR1310
TR1310
To others
TR1310
TH1310WF
24 VCA
Baseboard
Convector
Transformer
CONNECT YOUR THERMOSTAT TO YOUR APPLICATION
Tap the then select "Add Device"
2
1
If you do not have an account yet,
download the Neviweb app for iOS or
Android to open an account and add
your device.
Follow the steps of the Installation Wizard
3
To disconnect your thermostat from the Wi-Fi router press the
and buttons simultaneously for 10 seconds. The symbol
will disappear from the display.
To remove your thermostat from Neviweb, press Delete in
the thermostat settings.
DISCONNECT YOUR THERMOSTAT FROM THE
WI-FI ROUTER OR THE NEVIWEB APP
Operating voltage:
120/208/240 Vac, 50/60 Hz
Maximum load:
1800 W @ 120 V / 15 A
3120 W @ 208 V / 15 A
3600 W@ 240 V/ 15 A
Setpoint range:
5 °C to 36 °C (41 °F to 96 °F)
Display range:
0 °C to 50 °C (32 °F to 99 °F)
Resolution:
±
0.5 °C (
±
1 °F)
Storage:
-20 °C to 50 °C (-4 °F to 122 °F)
Auxiliary output:
24 Vac/Vdc / 0.1 A
GFCI protection:
Class A (5mA)
Protocole :
Wi-Fi
Standard:
IEEE 802.11 b/g/n
Frequency:
2.4 GHz
