14 | Sinterit POWDER SIEVE User Manual
7. Maintenance of the Sinterit POWDER SIEVE
This section describes the control and special maintenance operations crucial for keeping the Sinterit POWDER SIEVE
in perfect working condition
WARNING!
Before replacing the accessories or beginning the assembly, repair, transport,
or any form of maintenance, disconnect the Sinterit POWDER SIEVE from the
power source.
ATTENTION!
Before starting any maintenance or cleaning job, always wear adequate protective clothing,
eyewear, face mask, and/or gloves according to the type of job to be done.
CAUTION!
•
The Lid
1
is heavy!
•
The danger of crushing upper limbs when lowering the Lid or closing the Door.
IMPORTANT!
Before starting any maintenance work, read and understand this user manual.
A. PERIODICAL MAINTENANCE
•
After each use of the powder sieve, clean it with compressed air or with a Sinterit ATEX Vacuum Cleaner (we
recommended). Clean both chamber (top and front).
•
Check the Lid endstops
16
and Door endstop
17
. Clean them off from the powder and dust. Endstops work properly
if, while the powder sieve is running, the user opens the Door or Lid and the motor automatically switches off.
16
16
17
Image 9. Position of the Lid’s endstops and Door’s endstop.
