8 | Sinterit POWDER SIEVE User Manual
C. PERSONAL PROTECTION
ATTENTION!
•
The operator must always wear antistatic clothes and shoes.
•
The floor of the area must be antistatic.
ATTENTION!
•
Prevent breathing in dust at all times, wear respiratory protection at all times.
When one enters the room where the powder sieve stands with regard to
particulate matter that is released during the sieving.
•
Breathing in particulate matter causes serious lung problems.
•
At all times wear Protective Dust Mask and Protective Glasses when opening
the Lid/Door after using the machine (e.g. you can use the “PERSONAL
PROTECTION” set included with Lisa printers).
ATTENTION!
After each use of the Sinterit POWDER SIEVE, wash your hands.
D. POWER SUPPLY
WARNING!
•
Before plugging in, make sure the power voltage and frequency are those
shown on the machine safety plate.
•
Use only the power supply that meets the power and safety conditions.
•
Do not use cables/supplies from other devices. Using the power cables from
other devices or connecting the power supply supplied with the product to
other devices may cause a fire or electric shock.
•
When an extension cord is used for the power supply of the product, make
sure that the total power consumption of all devices connected to it does
not exceed the extension cord’s limit. Also, make sure that the total current
drawn by connected equipment does not exceed the ampere rating for AC
wall outlet.
•
The device should be placed near a wall outlet, which can be easily unplugged.
WARNING!
•
When connecting/disconnecting the plug to/from the power source always
hold the cover, not the cord.
•
Pay special attention to the fact that the power cables are not bent at the
points of connection of the sieve.
•
During use, mind the power supply cables and avoid crushing, pulling, twisted
or rubbed these.
•
Periodically check the mains power cable to ensure it is not damaged.
•
In the event of the cable, plugs or couplings being replaced, make sure these
are protected against water spray and check mechanical strength.
STOP!
•
Never pull the machine by means of the power cable.
•
In the event of the cable being damaged, the machine must not be used.
•
Do not place objects on the power cables.
•
Do not place power cables in a path where people will have to walk or run.
