background image

4  |   Sinterit SANDBLASTER SLS User Manual

2. Safety Information

The Sinterit SANDBLASTER SLS may create a powerful stream of abrasive particles. To avoid injuries and/or property 

damage, carefully read the instruction manual before assembling, operating or performing maintenance of the sandblaster. 

While operating the machine, please exercise your common sense at all times.

2.1 Environment and place of installation

WARNING!

• 

The sandblaster must be positioned protected against atmospheric agents (rain, hail, snow, 
fog, dust in suspension, etc.) with an environmental running temperature between 5°C and 
45°C and relative humidity not above 70%. 

• 

The work environment must be clean, well-enough lit and devoid of an explosive atmosphere.

• 

Debris and bad lighting are factors that can cause dangerous situations.

• 

Never operate this machine in a dangerous working environment. The use of power 

equipment in moist environments or rain can cause electrocution. 

• 

Place the unit on a solid and level surface.

2.2 General safety rules

WARNING!

• 

Only adults should use the sandblaster.

• 

When using the machine, mind other people, especially children. Keep kids and visitors at a 
safe distance.

WARNING!

• 

Fire and explosion hazard! 

The sandblaster must not be operated in a 

corrosive or explosive environment. 

• 

Avoid prolonged contact with solvents and inhaling their vapours. 

• 

Avoid using the device near open flames.

• 

Never use this machine near flammable liquids and/or gases.

2.3 Personal protection

WARNING!

• 

The operator must always wear antistatic clothes and shoes.

• 

Workplace flooring must be anti-static.

WARNING!

• 

During operation, do not expose your skin or hands directly to the line of 
operation of the Sinterit SANDBLASTER SLS Static nozzle 

20

 and Air blow 

guns 

L

22

.

• 

Wear a protective mask when working with the sandblaster. 

• 

Breathing in particulate matter causes serious lung problems.

• 

Wear Protective Glasses when opening the door after using the machine.

 

 

ATTENTION!

After each use of the Sinterit SANDBLASTER SLS, wash your hands.

 

Summary of Contents for SANDBLASTER SLS





















Reviews: