background image

14 

  OPERATING INSTRUCTIONS….cont 

1. Plan your work site; work safely and save effort by planning your work area before 

hand. Have your logs positioned where they can be easily reached, have a site locat-

ed to stack the split wood or load it onto a nearby truck or other carrier. 

2.  Set the support table (as shown on page 13) to the 

correct position for the length of logs to be split. The 

log  splitter  accommodates  logs  up  to  104cm  in 

length.  

Bleed  the  air  out  of  the  hydraulic  system 

before starting the log splitter, and keep the 

cap open during operation.  

The  hydraulic  oil  filler  cap  should  be  loos-

ened  by  some  rotations  until  air  can  flow 

into and out of the oil tank smoothly. Air flow 

through the oil tank filler should be detecta-

ble during the operation. 

IMPORTANT: 

Always  open  the  hydraulic  oil  filler  cap  before  using  the  log 

splitter  and  keep  it  open  during  operation.  When  not  in  operation  ensure 

the hydraulic oil filler cap is fully closed.

 

CAUTION: 

Failing to open and leave the hydraulic oil filler cap open when in use will lock the 

sealed air in the hydraulic system. Such continuous air compression will blow out the seals of 
the hydraulic system, this will cause permanent damage to the log splitter and void the war-
ranty. 

11 

  GETTING TO KNOW YOUR LOG SPLITTER….cont 

Allow  only  one  person  to  load  and  operate  the  log  splitter.  Always 

keep bystanders, including visitors, children and pets away from the 

work area, especially when the log splitter is under operation. Only 

the  operator  should  stand  near  the  machine.  Never  use  another 

person  to  help  you  with  freeing  a  jammed  log.  No  one  under  the 

age of 16 should be allowed to operate the log splitter. Any individ-

ual under the age of 18 should have the necessary training skills to 

perform  the  functions  properly  and  safely  and  should  always  be 

under the supervision of an adult. 

When the ram of the log splitter is in the return mode, keep your hands off 

the machine – the log splitter is designed to automatically stop when the 

cylinder  is  fully  retracted.  Keep  you  hands  away  from  splits  and  cracks 

which  open  in  the  log.  They  may  close  suddenly  and  crush  or  amputate 

your hands.  

Do not straddle or reach across the splitting area when operating the log 

splitter. Never pile logs to be split in a manner that will cause you to reach 

across  the  log  splitter.  Only  use  your  hands  to  operate  the  control  levers. 

Never use your foot,  knee,  a rope, or any other extension device. Always 

pay  full  attention  to  the  movement  of  the  wedge  ram.  Never  attempt  to 

load your log splitter while the ram is in motion. Keep hands out of the way 

of all moving parts. Never try to split two logs on top of each other. One of 

them may fly up and cause injury. 

Do not wear loose clothing, gloves, neckties or jewellery (rings, wrist watch-

es).  They  can  be  caught  in  moving  parts.  Non-skid  footwear  is  recom-

mended  during  operation.  Wear  protective  hair  covering  to  contain  long 

hair, preventing it from getting caught in the machinery. 

Summary of Contents for 01977













Reviews: