background image

Pocket Printer A6   

 

 

User’s Guide 

 

 

SiPix Technical Support           

www.sipix.com/support

 

 

15

 

External Modem:

 modems that use external Serial ports prevent other Serial 

devices from being attached (if the computer has only one Serial Port.) Users 
should generally consider using a USB or an Internal modem in resolving the 

matter. Please contact the vendor of the computer for additional connectivity 
information or options. 

 

Disabling HotSync Manager on a PC: 

PalmPilot or Handspring Visor PDA 

devices use the Palm Desktop and HotSync Manager software in synchronizing 
data between the PDA and the computer. When the HotSync Manager software is 
running, it will prevent other software from accessing or utilizing the Serial Port. 

When the Pocket Printer A6 attempts to print, the HotSync Manager software will 
effectively block any communication. 

 
In order to resolve this, you should temporarily close the HotSync Manager 

software. When you would like to sync the PDA, you can easily restart the 
HotSync Manager software. To close the HotSync Manager, please RIGHT CLICK 

the HotSync Manager ICON—it’s a red and blue circle—in your System Tray, 
located next to the Clock. Select EXIT. 
 

Further, you can prevent the HotSync Manager software from automatically 
starting when you boot your computer. Typically, you would simply start the 

software when it was needed. Please contact the vendor of the PDA for additional 
information on this matter. 

Summary of Contents for POCKET PRINTER A6

























Reviews: