© 2003 - 2005 Sipura Technology, Inc
Proprietary (See Copyright Notice on Page 2)
37
1. The SPA IVR uses the following conventions: By factory default there is no password and no
password authentication is prompted for all the IVR settings. If administrator password is set,
password authentication will be prompted for certain IVR settings. See 3.4.2 for detailed information
about administrator password.
To input the password using the phone keypad, the following translation convention applies:
o
To input: A, B, C, a, b, c -- press ‘
2
’
o
To input: D, E, F, d, e, f -- press ‘
3
’
o
To input: G, H, I, g, h, i -- press ‘
4
’
o
To input: J, K, L, j, k, l -- press ‘
5
’
o
To input: M, N, O, m, n, o -- press ‘
6
’
o
To input: P, Q, R, S, p, q, r, s -- press ‘
7
’
o
To input: T, U, V, t, u, v -- press ‘
8
’
o
To input: W, X, Y, Z, w, x, y, z -- press ‘
9
’
o
To input all other characters in the administrator password, press ‘
0
’
Note
: This translation convention only applies to the password input.
For example
: to input password “
test#@1234
” by phone keypad, you need to press the following
sequence of digits:
8378001234
.
2. After entering a value, press the
#
(pound) key to indicate end of input.
o
To Save value, press ‘
1
’
o
To Review the value, press ‘
2
’
o
To Re-enter the value, press ‘
3
’
o
To Cancel the value entry and return to the main configuration menu, press ‘
*
’ (star)
Notes:
o
The final ‘#’ key won’t be counted into value.
o
Saved settings will take effect when the telephone is hung-up and if necessary, the SPA will
automatically reboot.
3. After one minute of inactivity, the unit times out. The user will need to re-enter the configuration
menu from the beginning by pressing
* * * *
.
4. If, while entering a value (like an IP address) and you decide to exit without entering any changes,
you may do so by pressing the
*
(star) key
twice within a half second
window of time. Otherwise,
the entry of the
*
(star) key will be treated as a dot (decimal point).
Example: To enter IP address, use numbers 0 – 9 on the telephone key pad and use the * (star) key
to enter a decimal point.
To enter the following IP address value: 192.168.2.215
A. Use the touchtone key pad to enter:
192*168*2*215#
B. When prompted, enter
1
to save setting to configuration.
C. Hang-up the phone to cause setting to take effect.
- or -
