© 2003 - 2005 Sipura Technology, Inc
Proprietary (See Copyright Notice on Page 2)
40
Note: If the Administrator password is not set or the user is allowed to change it, the items marked
with “Requires Password” will not require a password.
3.4. Web
Interface
The SPA provides a built-in web server. Configuration and administration can be performed through
this convenient web interface.
3.4.1.
Web Interface Conventions
The SPA uses the following conventions with the web administration capabilities:
o
The SPA web administration supports two privilege levels: Administrator and User. To use
the User privilege, simply point a web browser at the IP address of the SPA; to use the
administrator privilege, use URL
http://IP_Address_Of_SPA/admin
/. See 3.4.2 for more
information about administration privileges.
o
Version 1.0 of the SPA supports Internet Explorer 5.5 and above and Netscape 7.0 and
above.
o
The web configuration pages can be password protected. See 3.4.2 for more information
about password protect.
o
The user name of web Administrator is :
admin
o
The user name of web User is :
user
o
Note
: The user names for both administrator and User are fixed and cannot be
changed.
o
After making changes to SPA configuration parameters, pressing “
Submit All Changes
”
button will apply all the changes and if necessary, automatically reboot the device. Multiple
changes may be made on multiple page tabs of the web interface at the same time. Pressing
“
Submit All Changes
” will apply all the modifications.
Important Note
: switching between page tabs won’t apply the changes to SPA, The only way
to apply the changes is to press the “
Submit All Changes
” button.
o
If the “
Undo All Changes
” button is clicked, any modifications to profile parameters
on any and
all pages
will be reset back to their original values before modification.
NOTE
: Pressing the “
Undo All Changes
” has no effect on the SPA; it will only reset the
values on the web page.
3.4.2. Administration
Privileges
The SPA supports two levels of administration privileges: Administrator and User, both privileges can
be password protected.
Important note
: by factory default, there are no passwords assigned for both
Administrator and User.
The Administrator has the privilege to modify all the web profile parameters and can also modify the
passwords of both Administrator and User. A User only has the privilege to access part of the web
profile parameters; the parameter group that User can access is specified by the Administrator, which
can only be done through provisioning.
To access the Administrator level privilege, use URL:
http://IP_Address_Of_SPA/admin
/. If the
password has been set for Administrator, the browser will prompt for authentication. The username
for Administrator is “admin” and cannot be changed.
