Sipura Technology Sipura SPA-2000 Administration Manual Download

Page: 5 / 136

Proprietary (See Copyright Notice on Page 2)

4.13.5.

PSTN Line – FXO Timer Values – In seconds .......................................................................106

4.13.6.

PSTN Line – PSTN Disconnect Detection ..............................................................................106

4.13.7.

PSTN Line – International Control ..........................................................................................107

4.13.8.

Line 1 and PSTN Line – Audio Configuration .........................................................................108

4.13.9.

Line 1 – Gateway Accounts ....................................................................................................108

4.13.10.

Line 1 – VoIP Fallback To PSTN ............................................................................................109

4.13.11.

Line 1 – Dial Plan ...................................................................................................................109

4.13.12.

User1 – Call Forward Settings................................................................................................109

4.13.13.

User1 – Selective Call Forward Settings ................................................................................110

4.13.14.

Regional – Call Progress Tones .............................................................................................110

4.13.15.

Info – FXO Status ...................................................................................................................110

4.13.16.

PSTN User – PSTN-To-VoIP Selective Call Forward Settings ...............................................111

4.13.17.

PSTN User – PSTN-To-VoIP Speed Dial Settings .................................................................112

4.13.18.

PSTN User – PSTN Ring Thru Line 1 Distinctive Ring Settings .............................................112

4.13.19.

PSTN User – PSTN Ring Thru Line 1 Ring Settings ..............................................................112

4.13.20.

PSTN/VoIP Caller Commands via DTMF ...............................................................................112

User Guidelines ......................................................................................................................... 112

5.1.

Basic Services .................................................................................................................. 113

5.1.1.

Originating a Phone Call .............................................................................................................113

5.1.2.

Receiving a Phone Call ...............................................................................................................113

5.2.

Enhanced Services........................................................................................................... 113

5.2.1.

Caller ID ......................................................................................................................................113

5.2.2.

Calling Line Identification Presentation (CLIP) ............................................................................114

5.2.3.

Calling Line Identification Restriction (CLIR) – Caller ID Blocking...............................................114

5.2.4.

Call Waiting .................................................................................................................................115

5.2.5.

Disable or Cancel Call Waiting ....................................................................................................115

5.2.6.

Call-Waiting with Caller ID...........................................................................................................116

5.2.7.

Voice Mail....................................................................................................................................117

5.2.8.

Attendant Call Transfer ...............................................................................................................117

5.2.9.

Unattended or “Blind” Call Transfer.............................................................................................118

5.2.10.

Call Hold .................................................................................................................................119

5.2.11.

Three-Way Calling..................................................................................................................119

5.2.12.

Three-Way Ad-Hoc Conference Calling .................................................................................120

5.2.13.

Call Return..............................................................................................................................120

5.2.14.

Automatic Call Back ...............................................................................................................121

5.2.15.

Call FWD – Unconditional ......................................................................................................121

5.2.16.

Call FWD – Busy ....................................................................................................................122

5.2.17.

Call FWD - No Answer ...........................................................................................................123

5.2.18.

Anonymous Call Blocking .......................................................................................................124

5.2.19.

Distinctive / Priority Ringing and Call Waiting Tone................................................................124

5.2.20.

Speed Calling – Up to Eight (8) Numbers or IP Addresses ....................................................125

Troubleshooting......................................................................................................................... 125

6.1.

Symptoms and Corrections .............................................................................................. 125

6.2.

Error and Log Reporting ................................................................................................... 125

6.2.1.

LED Blink Rate Definitions ..........................................................................................................126

Feature Descriptions ................................................................................................................. 126

7.1.

Data Networking Features ................................................................................................ 126

7.1.1.

MAC Address (IEEE 802.3).........................................................................................................126

7.1.2.

IPv4 – Internet Protocol Version 4 (RFC 791) upgradeable to v6 (RFC 1883)............................126

7.1.3.

ARP – Address Resolution Protocol............................................................................................126

7.1.4.

DNS – A Record (RFC 1706), SRV Record (RFC 2782).............................................................126

7.1.5.

DiffServ (RFC 2475) and ToS – Type of Service (RFC 791/1349) ..............................................126

7.1.6.

DHCP Client – Dynamic Host Configuration Protocol (RFC 2131)..............................................126

7.1.7.

ICMP – Internet Control Message Protocol (RFC792) ................................................................127

7.1.8.

TCP – Transmission Control Protocol (RFC793).........................................................................127

7.1.9.

UDP – User Datagram Protocol (RFC768)..................................................................................127

7.1.10.

RTP – Real Time Protocol (RFC 1889) (RFC 1890)...............................................................127

7.1.11.

RTCP – Real Time Control Protocol (RFC 1889) ...................................................................127

7.2.

Voice Features.................................................................................................................. 127

Summary of Contents for Sipura SPA-2000









































































































































Search results

Summary of Contents for Sipura SPA-2000

Reviews:

Related manuals for Sipura SPA-2000

Brands by name

Popular brands

Sipura Technology Sipura SPA-2000, Administration Manual

Search results

Summary of Contents for Sipura SPA-2000

Reviews:

Related manuals for Sipura SPA-2000

Brands by name

Popular brands