© 2003 - 2005 Sipura Technology, Inc
Proprietary (See Copyright Notice on Page 2)
68
Ext RTP Port Min
External port mapping of <RTP Port Min>. If this
value is non-zero, the RTP port number in all
outgoing SIP messages is substituted by the
corresponding port value in the external RTP port
range.
Port 0
NAT Keep Alive Intvl
Interval between sending NAT-mapping keep alive
message in sec
Uns16 15
Notes:
3.5.7.
Line 1 and Line 2 Parameters
Per line parameter tags must be appended with [1] or [2] (corresponding to lines 1 or 2) in the
configuration profile. It is omitted below for readability.
3.5.7.1. User
Account
Information
Parameter Name
Description
Type
Default
Line Enable
Enable this line for service
Bool
Yes
MOH Server
2
The User ID or URL of the auto-answering SAS to
contact for MOH services. Examples: 5000,
1001@music.sipura.com, 66.12.123.15:5061.
Note: When only a user-id is given, the current
proxy or outbound proxy will be contacted as in the
making of a regular outbound call. MOH is disabled
if this parameter is not specified (empty).
Str127 Empty
SIP Port
SIP message listening port and transmission port
Port
5060
Ext SIP Port
External port to substitute for the actual SIP port of
the unit in all outgoing SIP messages. If “0” is
specified, no SIP port substitution is performed.
Port 0
Auth Resync-Reboot
If yes, SPA will authenticate sender when it
receives NOTIFY resync reboot (RFC-2617)
Bool no
SIP Proxy-Require
SIP proxy can support a specific extension or
behaviour when sees this header from user agent.
If this field is filled and Proxy does not support, it
will respond with "unsupported".
SIP Remote-Party-ID
When this parameter is yes, the Remote-Party-ID
header will be used instead of the From header.
Bool no
RTP Log Intvl
SPA will log on specific interval RTP statistics via
syslog depending on debug level. 0 disables this.
Time0 0
Restrict Source IP
3
If Line 1 and 2 uses the same <SIP Port> value
and <Restrict Source IP> option is enabled, then
the <Proxy> IP address for both Line 1 and 2
are treated as acceptable IP address for both Lines
Bool no
Referor Bye Delay
Control when SPA sends BYE to terminate stale
call legs on transfer completion as the Referor,
Referee, Refer-To and Refer Target respectively.
Default 0, does not send BYE to call legs.
Time0 0
Referee Bye Delay
(see Referor Bye Delay)
Time0
0
Refer Target Bye
Delay
(see Referor Bye Delay)
Time0
0
Refer-To Target Bye
Delay
(see Referor Bye Delay)
Time0
0
