© 2003 - 2005 Sipura Technology, Inc
Proprietary (See Copyright Notice on Page 2)
78
indicating that there are no more unread voice mails.
Some equipment requires a short ring to precede the
FSK signal to turn off VMWI lamp
Notes:
1. Caller number patterns are matched from Ring 1 to Ring 8. The first match (not the closest
match) will be used for alerting the subscriber.
2. Feature not yet available.
3.5.9. Regional
Parameters
3.5.9.1. Call Progress Tones
Parameter Name
Description
Type
Default
Dial Tone
1
Played when prompting the user to enter a
phone number
ToneScript 350@-19,440@-
19;10(*/0/1+2)
Second Dial Tone
An alternative to <Dial Tone> when user
tries to dial a 3-way call
ToneScript 420@-19,520@-
19;10(*/0/1+2)
Outside Dial Tone
1
An alternative to <Dial Tone> usually used
to prompt the user to enter an external
phone number (versus an internal
extension). This is triggered by a “,”
character encountered in the dial plan.
ToneScript 420@-16;10(*/0/1)
Prompt Tone
1
Played when prompting the user to enter a
call forward phone number
ToneScript 520@-19,620@-
19;10(*/0/1+2)
Busy Tone
Played when a 486 RSC is received for an
outbound call
ToneScript 480@-19,620@-
19;10(.5/.5/1+2)
Reorder Tone
1,2
Played when an outbound call has failed
or after the far end hangs up during an
established call
ToneScript 480@-19,620@-
19;10(.25/.25/1+2)
Off Hook Warning
Tone
2
Played when the subscriber does not
place the handset on the cradle properly
ToneScript 480@-
10,620@0;10(.125/
.125/1+2)
Ring Back Tone
Played for an outbound call when the far
end is ringing
ToneScript 440@-19,480@-
19;*(2/4/1+2)
Confirm Tone
This should be a brief tone to notify the
user that the last input value has been
accepted.
ToneScript 600@-
16;1(.25/.25/1)
SIT1 Tone
An alternative to <Reorder Tone> played
when an error occurs while making an
outbound call. The RSC to trigger this tone
is configurable (see Section ???)
ToneScript 985@-16,1428@-
16,1777@-
16;20(.380/0/1,.380
/0/2,.380/0/3,0/4/0)
SIT2 Tone
See <SIT1 Tone>
ToneScript
914@-16,1371@-
16,1777@-
16;20(.274/0/1,.274
/0/2,.380/0/3,0/4/0)
SIT3 Tone
See <SIT1 Tone>
ToneScript
914@-16,1371@-
16,1777@-
16;20(.380/0/1,.380
/0/2,.380/0/3,0/4/0)
SIT4 Tone
See <SIT 1 Tone>
ToneScript
985@-16,1371@-
16,1777@-
16;20(.380/0/1,.274