DRAFT
© 2003 - 2005 Sipura Technology, Inc
Proprietary (See Copyright Notice on Page 2)
22
For Option input, the SPA-841 will show SK(option) pressing which will either a) change the input field to
the next available choice in round-robin fashion, or b) bring up a menu of choices that the user can select
from.
For most settings, the input value is saved once the user press SK(save) or SK(ok) before exiting the edit
screen for that setting. However, there are a few exceptions where the user must press SK(save) again at
the upper level when all the required changes have been made to the settings so that they are saved into
the configuration at the same time. These exceptions are:
Preferences
•
Call
Forward
•
Network
Speed Dials
The user can configure up to 8 speed dials in the SPA-841. To configure a speed dial, select the Speed
Dial option under the
i
menu. The user can configure a speed dial for digit 2, 3, …, and 9. If a slot is not
configured, it will show <Not Assigned> on the entry. High light the speed dial entry you want to add or
modify, press SK(edit) to make the changes, and press SK(ok) to store the value.
A speed dial entry can be a phone number or URL. The user can also enter a name that matches one of
the directory entries. As you enter the value, the SPA-841 will attempt to match the entry to the directory
entries and brings up a list of potential matches on the screen. User can scroll down to select one of the
suggested entries.
To dial a speed dial, dial the corresponding single digit like a 1-digit phone number. The user can enter
“#” after the speed dial number but it is not necessary.
Caller and Called Name Matching
When making an outgoing call, SPA-841 will try to find the dialed number in the personal directory first,
and then from the missed call log, and finally from the answered call log. If a match is found and the
name field is present in the matched entry, it will be shown on the call screen as the called peer’s name.
For incoming calls, SPA-841 will try to find the caller’s phone number in the personal directory. If a match
is found and the name field is present in the matched entry, it will replace the current caller ID name and
will be shown on the call screen as the calling peer’s name. The same name will also go into the incoming
call log. If a match is not found, or the name field is not present in the matched entry, the current caller ID
name will be used if it exists.
Dialing Assistance
Dialing assistance is an option the user can enable or disable under the Preferences option of the
i
menu.
If the option is enabled, the phone will show up to 10 potential matches from the Redial List (most recent
first) and from the Personal Directory as the user dials the target number. This feature applies to both off-
hook (with dial tone) and on-hook (without dial tone) dialing. When the suggestion list appears, the user
can scroll down the list using the Up/Down key to select the desired target number from the list.
