TC620-PID
Page 100
13.2.2
MX Receiver Settings
Item
Description
Enable
Select/Clear to enable/disable the stream reception, respectively.
Source address
IP address of the codec that will transmit the stream.
Port
The local port number of the TC620-PID.
13.3
Advanced
Important:
If in doubt about these settings, do
not
change the default values.
13.3.1
Audio Input
Audio > Advanced > Audio Input
Item
Description
Channels
Range: [1…2]. When selecting 1 channel, only the signal on the ‘A1’ input is used
(either line or microphone).
Sample rate
Range: [7850…48000]. Allows you to enter custom settings (other than those
included in the Profile list in the Input Settings section), e.g., for communication with a
C-20 codec.
Examples:
7850 Hz
15710 Hz
15710 Hz
43200 Hz
A-law
A-law
PCM
PCM
Auto detect threshold
channel 1
Range: [-
60…0] dB. The audio level is measured. When the audio level reaches the
threshold set here, the audio detect flag is set. This flag can be used to generate a
‘silence’ alarm or a ‘too much noise’ alarm.
Auto detect threshold
channel 2
13.3.2
Audio Output
Audio > Advanced > Audio Output
