TC620-PID
Page 118
To enable PTZ control
1. In the
Camera Settings
section, specify the Camera ID/address.
2. From the
PTZ driver
list, select the protocol supported by the PTZ device you wish to control.
3. Click
Save
.
You can now control the camera with the control panel on the Live Video page.
16.2
Upload/Remove PTZ drivers
To upload a PTZ driver
1. In the
PTZ Driver Management
section, click
Browse
.
2. In the
File to Upload
dialog box, browse to the folder containing the driver.
3. Select the appropriate file (
.txt
or
.js
extension), and then click
Open
.
The driver displays in the
File
text box.
4. Click the
Add
button.
The driver is added to the list of available drivers in the
PTZ Driver Management
and
Camera
Settings
sections.
To remove a PTZ driver
1. In the
PTZ Driver Management
section, select the driver you wish to remove.
2. Click the
Del
button.
16.3
Data Settings
PTZ > Data Settings
Item
Description
Bit rate
1200, 2400, 4800,
9600, 19200,
38400, 57600,
115200 bit/s.
The speed of the digital transmission - that is, the amount of
information transferred/processed per unit of time.
Word length
(excluding parity)
5, 6, 7, 8.
Determines the number of bits that is transferred in a single
operation.
Stop bits
1, 2.
Indicate the end of a data character to enable the receiver to
resynchronise with the stream.
Parity mode
None, Even, Odd,
Mark , Space
Enables sending of an extra bit with each data character for
error detection purposes.
Note:
Changes you make in the Data Settings section are copied to the RS-422/485 page.
