10
of 12
MA14-710ENG-REV1
The first image stored on the unit, based on its file name, displays on the LCD
screen for approximately five seconds followed by the second image, the third,
and so on.
3. Press and HOLD the red button
for approximately three seconds to exit
Auto Review mode and return to live view.
Troubleshooting
The unit does not turn on.
• Press the green/yellow
Power
button. If the unit does not turn on, charge the bat-
tery.
Note:
The battery does not charge when the unit is connected to a USB port.
The screen is blank.
• If the unit is sitting on a flat surface, the screen is blank (black). Lift the unit off the
surface, or open the stand.
• When the unit is connected to a computer via USB, the screen is blank.
• Turn the unit off and then on again.
• Verify that the item you want to magnify is positioned correctly under the camera
window.
• Press the yellow
Magnification
buttons to step through the magnification levels.
• Press the blue
Color Mode
buttons to step through the color modes.
• When the stand is closed, the unit automatically turns off.
The battery LED is flashing red.
• Charge the battery.
The battery LED is solid red while the power adapter is connected to the unit.
• A battery error has occurred. Unplug the power adapter from the unit and plug it
in again.
• If the problem continues, disconnect the power adapter and contact SIRCHIE as
mentioned earlier in this document.
The battery indicator LED does not flash green, even though the power adapter
is connected and plugged into a wall socket.
• Ensure that the small end of the power adapter is firmly plugged into the unit’s
power port.
• Ensure that the outlet has power and is not malfunctioning. If the outlet is con-
nected to a wall switch, make sure the switch is on.
The battery is not charging.
• Use the
supplied
power adapter to charge the unit. A USB port does not provide
enough power to charge the unit.
• Make sure the small end of the power adapter is firmly plugged into the unit’s
power port.
• Ensure that the outlet has power and is not malfunctioning. If the outlet is con-
nected to a wall switch, make sure the switch is on.
There are smudges or blemishes on the screen.
• Clean the LCD screen as described in
Cleaning Procedures
.
The image is too small or too large on the screen.
• Press the yellow
Magnification
buttons to increase or decrease magnification. For
live images, press and HOLD a magnification button for continuous zoom magni-
fication. For frozen or saved images, press a magnification button to zoom in or
out one step at a time.
