[
Warning and Safety Information
]
Warning and Safety Information
Safety Precautions
Be sure to observe the following warnings. Failure to follow these safety instructions
and warnings may result in a serious accident and/or personal injury.
Install the cables and wiring so that it is not crimped or pinched by screws or
sharp metal edges. Route the cables away from moving parts or sharp pointed
edges. This will prevent crimping and damage to the wiring. If the wiring must pass
through a metal hole, be sure to use a rubber grommet to prevent the wire’s insula-
tion from being cut by the metal edge of the hole.
Use caution if you need to disconnect the battery terminal. Please consult the vehi-
cle’s owner’s manual or a service technician prior to removing the battery positive
or ground connection, as it may cause damage to the vehicle’s electrical system or
require reprogramming of the vehicle’s computer-controlled devices.
Do not operate any function that takes your attention away from safely driving your
vehicle. Any function that requires your prolonged attention should only be per-
formed after coming to a complete stop. Always stop the vehicle in a safe location
before performing these functions. Failure to do so may result in an accident.
Do not open, disassemble, or alter the unit in any way. Doing so may result in fire,
electric shock or product damage.
Do not insert any objects into the unit. Doing so may result in fire, electric shock or
product damage.
Do not install in locations that might hinder vehicle operation. Doing so may ob-
struct vision or hamper movement which can result in a serious accident.
•
•
•
•
•
•
