background image

B E F O R E   Y O U   B E G I N

The  manufacturer  declines  all      
responsibility in the event of failure 
to observe the instructions given 
here for installation, maintenance 
and  suitable  operation  of  the            
product.  The manufacturer further 
declines all responsibility for injury 
due to negligence and the warranty 
of the unit automatically expires due 
to  improper  maintenance  and/or   
installation.

BEFORE YOU BEGIN:

It is advisable to test run the

range hood before installation.

1

BEFORE STARTING – please read 
this entire document and ensure you 
are fully conversant with the require-
ments and limitations. These units 
weigh approximately 125lbs and 
therefore require a minimum of two 
people to install.  Remove the filter 
from the hood so that it does not get 
damaged during installation. 

M I N I M U M   A N D   M A X I M U M S

D U C T I N G

Min length of power unit structure with deflector connected = 38”
Min length of power unit without deflector = 33”
Max length of power unit structure = (SIU3, SIU4)= 48", (SIU5)=50”, and 
(SIU8)=47”
Recommended height from cook top to underside of hood = 30” for gas

     25” for electric

If vented externally, 6” / 150mm 
round ducting must be  available for 
the hood through the ceiling, in line 
with the central vertical axis of the 
range hood.

This unit must have it’s own duct 
w o r k .   D o   n o t   u n d e r   a n y                
circumstances vent this unit into any 
other ductwork or exhaust ducting in 
the building. 

PLEASE NOTE THAT THE DUCT 
OUTLET ON THE TOP OF THE 
POWER UNIT IS OFF SET FROM 
CENTER AND THEREFORE AN 
ADJUSTABLE 6” ROUND BEND 
WILL BE REQUIRED TO LINE THE 

EXHAUST OUTLET WITH THE 6” 
HOLE IN THE CEILING MOUNT 
BRACKET.

Use the shortest most direct duct 
work route possible. Only use metal 
ducting - plastic ducting is generally 
not permitted by code. Do not use 
flexible metal ducting as the ridges 
of  the  ducting  cause  severe  air    
turbulence and will significantly 

 

 

 

reduce the efficiency of any hood -
THIS TYPE OF DUCTING WILL 
REDUCE EFFICIENCY BY 50%.

Vent hoods may interrupt the proper 
flow of exhaust gases from fire-
places, gas furnaces and gas water 

                         

Call 1-800-667-8721 anywhere in the US and Canada

 -

 

www.kitchensource.com

U      N      L      I      M      I      T      E      D

Sirius at

 

kitchen

::

accessories

Reviews: