1
3
PANEL OPENING
DUCTING SYSTEMS
Open the panel by pulling it from the side
where the speed indicator of the extraction
motor is (Fig. 8). Accompany the panel with
your hands during the opening.
Following the panel opening, you can access
the grease filter and after its removal, acting
on the appropriate handle, you can reach the
seat of the charcoal filter (fig. 9).
To close the panel, simply bring it in hori-
zontal position until it the automatic closing
coupling occurs.
It is possible to install a main cooker hood with a
further one or two
MODULES SLT955 - SLT956
in a single extraction system and then connect it
to a single, internal or external, remote extraction
motor of the home.
An extraction system, formed of more than one
element, is controlled by a single remote con-
trol because only a main cooker hood
SLT955
or
SLT956
has all the electronic components nec-
essary for the functioning, whilst the remaining
MODULES SLT955
or
SLT956
are dependent on
the main cooker hood SLT955 or SLT956.
Other combinations can also be realised between
products
SLT955
and
SLT956
because only one
main cooker hood (
SLT955
or
SLT956
) is present
and two modules at the maximum.
A minimum distance of at least 110 mm is recom-
mended between the openings of the plasterboard
(Fig. 15) and a maximum distance of 1,000 mm.
A
B
C
Summary of Contents for SLT955
