[
Operation
]
1
wait a few minutes for your desired report.
Pressing the
Jump
button while the receiver is searching will cancel the search. Pressing
the
Jump
button after the receiver has tuned to your traffic report will return to the channel
to which you had been listening immediately prior to pressing the
Jump
button.
If the jump button is set to
JumpSet
, pressing the
Jump
button will immediately tune to the
programmed channel. Pressing the
Jump
button again will return to the channel to which
you had been listening immediately prior to pressing the
Jump
button.
Note
: The jump button setting remains the same regardless of which preset bank is currently
selected.
Channel Presets (P.TUNE Mode)
Searching for a Channel Preset
It is possible to quickly search through all of your presets using the
Rotary Knob
:
Press and hold the
BAND
button to enter the preset tune mode (P.TUNE).
The bottom right portion of the display will change to highlight the current preset num-
ber. (Figure 7)
Turn the
Rotary Knob
in either direction to move through the presets. The selected
preset channel will begin to play as soon as you stop turning the
Rotary Knob
.
Only stored presets will be displayed, regardless of what bank they are stored in. Presets will
be grouped and displayed by preset bank and number (for example, A-1, A-2...B-1, B-2...C-
1,C-2...) and rotate through all the presets and return back to the beginning preset.
To exit the preset tune mode and return to
Default
display screen, press and hold the
BAND
button.
A-1
1.
2.
3.
figure 7
figure 7
Summary of Contents for Spertster 4
Page 1: ...Satellite Radio Plug Play Receiver User Guide...
Page 2: ......
