42
instructions .
9.
You should hear audio through your vehicle’s FM radio . If you are satisfied
with the sound quality, the
Power
Connect installation is complete .
10.
Go back to “Step 2: Install the Dash or Vent Mount” on page 13
and finish installing the Dash or Vent Mount . Then the installation is
complete .
11.
If the selected FM channel doesn’t work well for you, work down the
list of FM channels until you find one with which you are satisfied .
Each time, you will need to tune your vehicle’s FM radio to the FM
channel and then set your Radio to transmit on the same FM channel
(steps 5 & 8) .
If the signal reception is good, showing at least two bars of signal strength,
but there is no audio, verify that both your Radio and your vehicle’s FM
radio are tuned to the same FM channel (steps 5 & 8) . Also ensure the
chosen FM channel is a suitable one to use in your area (step 4) . Verify that
nothing is plugged into the
AUDIO
connector on the
Power
Connect Vehicle
Dock . Refer to “Troubleshooting” on page 43 for additional help .
Option 4: FM Direct Adapter (FMDA) Installation
The FMDA needs to be installed by a professional installer . Professional
installation can help improve your Radio’s reception and significantly
reduce the visibility of wires . To learn more, check with the retailer where
you bought your Radio, or go to
www .siriusxm .com/accessories
.
Vehicle Installation
99.3
6
jump
fm
menu
7
8
9
0
#
1
2
3
4
5
MATCH FM CHANNELS