22
Install the Magnetic Mount Antenna...
a.
Mount the Magnetic Mount Antenna outside your vehicle, on a
clean and dry horizontal surface that will always face the sky.
b.
Choose the location for the antenna according to your type of
vehicle. Center it between the left and right sides, and away from
other antennas. Use the Alcohol Prep Pad to clean the surface.
c.
Install the Cable Routing
Adapter to direct the antenna
cable downward, if mounting
on an edge. Then mount the
antenna on the vehicle.
NOTE:
Steps
d
through
f
describe the antenna cable routing for a sedan or coupe where
the antenna is mounted above the front windshield. The Lynx User Guide has detailed
antenna cable routing instructions for all types of vehicles, online at
www.siriusxm.ca
.
d.
Tuck the antenna cable under the
windshield rubber molding and run it to
the nearest corner.
e.
Route the cable out of the molding and
into the rubber weather stripping around
the door opening. Lift the weather
stripping, tuck and run the cable inside
of it to the bottom of the door opening.
Replace the weather stripping.
Sedans and Coupes
(above front windshield
or rear window)
Pickups
(above front
windshield)
SUVs
(rear of roof)
Convertibles
(leading edge
of trunk)
Radio
Location
Summary of Contents for LYNX RADIO & VEHICLE KIT
Page 1: ...QUICK START GUIDE RADIO VEHICLE KIT Wi Fi ENABLED SiriusXM Portable Radio ...
Page 29: ......
Page 30: ......
Page 31: ......