23
...and
Power
Connect Power Adapter
TIP:
Include enough slack in your cable routing to accommodate open doors or the
hood lid. Coil any excess cable in a hidden location and keep it away from any vehicle
pedals or controls.
f.
Run the cable under the dash, or under a floor
mat, bringing it out at the Radio location.
g.
Plug the Magnetic Mount Antenna connector
into the
silver
ANT
connector at the rear of
the Vehicle Dock.
h.
Insert the
Power
Connect Power Adapter into
your vehicle’s cigarette lighter or power adapter
socket. Plug the other end into the
red POWER
connector on the rear of the Vehicle Dock.
i.
Place Lynx into the Vehicle Dock and press
the
Power button
for 3 seconds.
IMPORTANT!
Wait until you have connected the audio before
you connect the Vehicle Dock to the Vent Mount.
j.
If prompted to set the time zone, set your local time
zone. If you are prompted to take the tour, tap
No
thanks
. At the next screen tap
Continue
to be guided
through the activation process.
k.
Be sure the vehicle is parked in a safe place outside,
with a clear view of the sky, and tap
Continue
.
l.
If Lynx displays
Signal Found
, tap
Continue
and
proceed with connecting the audio in the next
section.
If Lynx displays
No Signal/Check Antenna
,
reposition the vehicle so that nothing is blocking
the antenna’s clear view of the sky, and tap
and then
Continue
to try again.
AUDIO
POWER
ANT
FM
Summary of Contents for LYNX RADIO & VEHICLE KIT
Page 1: ...QUICK START GUIDE RADIO VEHICLE KIT Wi Fi ENABLED SiriusXM Portable Radio ...
Page 29: ......
Page 30: ......
Page 31: ......
